QUECHUA

Camping Tent MH100 - 2-Person - Fresh&Black

Reference. 8576112

$69.00

Tax included

Size:

Sizes guide

Quantity

Home Delivery

Within 48 Hours

Available

Click & Collect

Pickup in store within 4 Hours

First night camping? Our designers developed this 2-person Fresh&Black tent that is simple and easy to pitch.

Meet our 2-person tent for your next escape. We equipped it with fresh&black technology so it stays cool and dark, and a freestanding dome structure, so you can move it to a better spot once deployed.

Pole: 100.0% Glass Fiber; Inside room: 45.0% Polyester, 55.0% Polyethylene; Double roof: 100.0% Polyester; Carry bag: 100.0% Polyester

BENEFITS

Easy assembly / dismantling

Free-standing structure. Simple pole installation.

Capacity

130 X 210 cm bedroom. Max. useful height: 106cm.

Easy transport

Dimensions of the bag: 58 cm x 15 cm x 14 cm / 12 L. Weight: 3kg.

Heat reduction

Side ventilation and Fresh & Black fabric for a good night's sleep.

Darkness

FRESH & BLACK patented exterior fabric: 99% darkness even in broad daylight.

Wind resistance

Withstands 40 km/h winds (Force 5): validated in wind tunnels on rotating plate.

Waterproof

Waterproofing (Schmerber): Flysheet > 2000 mm. Groundsheet > 2400 mm rating.

TECHNICAL INFORMATIONS

The Fresh & Black technology keeps the inside of your tent cooler and darker

Cooler and darker for better sleep!
Fresh & Black is a technology patented by Decathlon that allows us to reflect the sun's rays and insulate from the light thanks to specific materials.
This reduces the sensation of heat in the tent and makes it darker.To get the most out of this technology, don't forget to ventilate your tent at night!

Pitching and striking the tent

This tent has a classic dome structure.
All you have to do is fit the tent poles with the bedroom, followed by the upper tent pole, and finish by fitting the flysheet on the top. To strike the tent, the process is the same, but in reverse.

Mattress compatibility

Recommended tent with a self-inflating mattress or trekking mattress up to 65 cm wide.
We do not recommend using inflatable mattresses, that are more than 8 cm thick, in this tent.
Indeed, this greatly reduces the volume inside the tent and increases condensation inside.

Ventilation of the tent

So that air can flow and be replaced between the bedroom and the flysheet, and eliminate the natural condensation as much as possible, the tent has 2 air vents at the top and 2 mechanical air vents at the sides.

Waterproofing of the tent

All our tents are validated in the laboratory and in the field to guarantee the waterproofing.
To do this, we put the entire tent under a 200 L/h shower for 3 hours.
The flysheet is made of 2000mm Schmerber PU-coated polyester and the groundsheet is made of 120g/m² polyethylene. All the seams are sealed with thermobonded tape.

Wind resistance

We test all our tents in a wind tunnel on a turntable to expose each side to the wind. A well-assembled tent with all the guy ropes properly deployed around the tent should remain habitable with a wind speed measured at 40 km/h near the ground (Force 5).

What does my product contain?

- 1 bedroom
- 1 waterproof flysheet
- 2 main poles + 1 top pole
- 12 tent pegs
- 4 guy ropes
- 1 case

Warranty of your tent:

This camping tent was designed for occasional outdoor use (4 weeks per year) during your camping trips or in the countryside.
Continuous exposure to UV light over a period of several weeks can damage its textile part.
Our tents do not belong to the category of "garden furniture" and are not designed to be kept outdoors permanently.
To maximise the lifetime of your tent, it's important to store it properly when it is not being used.
5-year warranty.

Don't throw away, repair!

Our tents are great for camping at night.
Over time, they age and some parts may wear out or break.
To facilitate repairs, we keep a stock of parts (tent poles, flysheets, bedrooms, etc.) so that they can be easily replaced. Don't throw away, repair !

Product design: our expertise

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie.
This location is a place where our teams (designers, product managers, engineers, etc.) can meet with outdoor sports enthusiasts.
A significant advantage for designing high-quality products and giving you access to all our expertise.