Two progressive modes of operation: 1/ high volume 2/ high pressure
Power
Robust structure for high pressure. Wide handles.
Parameter measurement
Built-in 3-20 psi pressure gauge.
Starts working once the SUP takes shape (3psi)
Robustness
Heavy-duty hose with rotating head to prevent disconnecting during inflation.
TECHNICAL INFORMATIONS
SUP inflation tips
1/ Stand on flat and stable ground.
2/ Screw the hose onto the pump.
3/ Connect the hose to the SUP (valve raised).
4/ Close the cap on the body of the pump, its double action operation and delivers 3.6 L with each up and down stroke.
5/ Inflate the stand-up paddle board until it takes shape.
6/ As soon as pumping becomes difficult, open the cap, the pump then operates in single action (1.8 L with each down stroke).
7/ Inflate to the SUP's recommended pressure.
Storage tips
Roll up the hose, do not fold it.
Store the pump body and hose flat in the SUP bag.
Do not stand on the pump or the hose.
Clean off any sand, it can damage the seals.
TECHNICAL DIMENSIONS
Height: 61.5 cm
Width: 27.8 cm
Depth: 10 cm
Hose length: approx. 120 cm
70 mm diameter piston for easy high-volume inflation but high-pressure inflation takes a bit more effort.